SpeedyBee F405 V3 50A Stack 3-6S Lipo Barometer for RC Drone
Couldn't load pickup availability
Warranty
Warranty
All our items are new and come with a 3-year warranty under current law.
Shipping Conditions
Shipping Conditions
All shipments will be processed as quickly as possible and will be sent within the first 2 or 3 business days after payment, for most orders.
Shipping costs can be found on the listing page, below the description. Enter the country, city, and postal code. The different shipping options will appear. You can also calculate shipping costs in the shopping cart after adding products.
You can also review the different options when placing your order, prior to payment.
We handle three types of shipping:
SHIPPING 24/48 HOURS: 1 TO 2 DAYS
STANDARD SHIPPING: 7 TO 10 DAYS
EXPRESS SHIPPING (DHL): 3 TO 5 DAYS (POSSIBLE CUSTOMS COSTS)
Depending on the destination country and item type, all or only one or two shipping options may be available.
Delivery times are approximate and may be affected by specific or unusual times. A refund may only be requested if the item has not been received within 30 days of payment.
Orders with 24/48-hour express shipping are only for Spain. For international destinations, this type of shipping can take up to 7 business days.
Orders for lithium batteries or items containing batteries will take longer than usual due to a different delivery schedule. They may be delayed up to 30 days.
Orders over €180 or orders that select Express Shipping via DHL may be subject to customs fees in the destination country, which will be borne by the buyer.
In the event of rejection or non-acceptance of the order due to customs costs or fees, the order amount will not be refunded.
The default shipping company responsible for delivering orders will be Correos or DHL for Spain, or the postal service of each country. Deliveries may occasionally be made through other shipping companies.
All shipments include a tracking number and are insured. Shipments are made Monday through Friday. No shipments are made on Saturdays, Sundays, or holidays.
SpeedyBee F405 V3 50A Stack 3-6S Lipo Barometer for RC Drone
Highlight title
Text to highlight a key feature of your product
Description
Description
MCU: STM32F405
IMU (gyroscope): BMI270
USB port type: Type C
Barometer: built-in
OSD chip: AT7456E chip
Bluetooth BLE: Supported. Used for flight controller configuration
DJI Air Unit Connection Way: Two ways are supported: 6-pin connector or direct soldering.
Blackbox MicroSD Card Slot: Supported. Please use a SDSC/SDHC microSD card of ≤4GB and it must be formatted in FAT16/FAT32 format. Do not use SDXC cards. Note: Betaflight can only recognize 4GB at most.
BetaFlight Camera Control Panel: Yes (CC pad on the front)
Current sensor input: supported. For SpeedyBee BLS 50A ESC, set scale to 386 and offset to 0.
Power Input: 3S-6S Lipo (via G, BAT pins/pads from the 8-pin connector or 8 pads on the bottom)
5V Output: 9 groups of 5V output, four +5V pads and 1 BZ+ pad (used for buzzer) on the front, and 4 5V LED pads. The total current load is 2A.
9V Output: 2 groups of 9V output, one +9V pad on the front and another one included in a connector on the bottom side. The total current load is 2A.
3.3V Output: Compatible. Designed for 3.3V input receivers. Load current up to 500mA.
4.5V Output: Support.Designed for GPS receiver and module even when the FC is powered via USB port.Charging current up to 1A.
ESC signal: M1-M4 at the bottom and M5-M8 at the front.
UART: 5 sets (UART1, UART2, UART3, UART4 (for ESC telemetry), UART6)
ESC UART Telemetry: R4(UART4)
I2C: Compatible. SDA and SCL pads on the front. Used for magnetometer, sonar, etc.
Traditional Betaflight LED Panel: Compatible. 5V, G and LED pads on the bottom of the front. Used for WS2812 LEDs controlled by Betaflight firmware.
Buzzer: BZ+ and BZ- pad used for 5V buzzer
RSSI input: Supported.Named as RS on the front.
SmartPort: not supported
Supported Flight Controller Firmware: BetaFlight (default), EMUFlight, INAV
Firmware target name: SPEEDYBEEF405V3
Mounting: 30.5 x 30.5 mm (4 mm hole diameter)
Dimensions: 41.6 (length) x 39.4 (width) x 7.8 (height) mm
Weight: 9.6g
Product Name: SpeedyBee BLS 50A 30x30 4 in 1 ESC
Firmware: BLHeli_S JH50
Wireless Setup: Complete setup supported by SpeedyBee App
Continuous current: 50A x 4
Burst current: 55A(5S)
TVS protection diode: Yes
External capacitor: 1000uF low ESR capacitor (in the package)
ESC Protocol: DSHOT300/600
Power input: 3-6S LiPo
Power output: VBAT
Current sensor: support (scale = 386 offset = 0)
Mounting: 30.5 x 30.5 mm (4 mm hole diameter)
Dimensions: 45.6 (length) x 44 (width) x 6.1 mm (height)
Weight: 13.8g
Payments and Security
Payment Methods
Your payment information is processed securely. We do not store or have access to your credit card information.
